Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
avilt
New Contributor

Fortigate 301E Management Interface

Does 301E firewall model support out of band network interface for management?

3 REPLIES 3
Markus
Valued Contributor

Yes

https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/FortiGate_300E.pdf

 


________________________________________________________
--- NSE 4 ---
________________________________________________________

________________________________________________________--- NSE 4 ---________________________________________________________
avilt
New Contributor

Is it really a "OUT OF BAND" interface?

The route should not appear in the routing table

Toshi_Esumi

I haven't done it with a standalone setup (always a-p HA) and we don't have 300 series (200D, 1000D, 1500D). But any model with "MGMT" port(s) should support "config system dedicated-mgmt" command below:

https://docs.fortinet.com/document/fortigate/6.0.0/cli-reference/303733/system-dedicated-mgmt

so that you can set the mgmt network's default GW, which should mean it doesn't show up user (root) routing table. With HA, it automatically does that so we don't have to configure "config system dedicated-mgmt", but configure it in "config system ha".

 

If you already have one, you can try above. If you're still considering purchasing it, ask sales/reseller. They should be able to verify with FTNT SE.

 

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors