Fortigate 300E memory

[live89]

Hello

We just connected Fortigate300E , but not to production , so no traffic going through it right now .. The memory is on 36% Is this normal ?

We're running version 6.0.3

[live89]

Run Time:  1 days, 17 hours and 50 minutes 0U, 0N, 1S, 99I, 0WA, 0HI, 0SI, 0ST; 7980T, 4932F        ipsengine      257      S <     0.0     2.7        ipsengine      259      S <     0.0     1.1        ipsengine      258      S <     0.0     1.1         dnsproxy      200      S       0.0     0.9        scanunitd      189      S <     0.0     0.5        scanunitd      232      S <     0.0     0.5        scanunitd      233      S <     0.0     0.5        scanunitd      235      S <     0.0     0.5        scanunitd      234      S <     0.0     0.5          cmdbsvr      151      S       0.0     0.4           httpsd     2516      S       0.0     0.4           httpsd     2518      S       0.1     0.4        ipshelper      216      S <     0.0     0.4          pyfcgid     9562      S       0.0     0.4          miglogd      239      S       0.0     0.3          miglogd      173      S       0.0     0.3          miglogd      238      S       0.0     0.3           httpsd      176      S       0.0     0.3          pyfcgid     9564      S       0.0     0.3          pyfcgid     9565      S       0.0     0.3

# get sys perf status CPU states: 0% user 1% system 0% nice 99% idle 0% iowait 0% irq 0% softirq CPU0 states: 0% user 0% system 0% nice 100% idle 0% iowait 0% irq 0% softirq CPU1 states: 0% user 3% system 0% nice 97% idle 0% iowait 0% irq 0% softirq CPU2 states: 0% user 0% system 0% nice 100% idle 0% iowait 0% irq 0% softirq CPU3 states: 0% user 1% system 0% nice 99% idle 0% iowait 0% irq 0% softirq Memory: 8172520k total, 2947128k used (36.1%), 5048288k free (61.8%), 177104k freeable (2.2%) Average network usage: 40 / 51 kbps in 1 minute, 38 / 49 kbps in 10 minutes, 29 / 36 kbps in 30 minutes Average sessions: 50 sessions in 1 minute, 52 sessions in 10 minutes, 53 sessions in 30 minutes Average session setup rate: 1 sessions per second in last 1 minute, 0 sessions per second in last 10 minutes, 0 sessions per second in last 30 minutes Average NPU sessions: 0 sessions in last 1 minute, 0 sessions in last 10 minutes, 0 sessions in last 30 minutes Average nTurbo sessions: 0 sessions in last 1 minute, 0 sessions in last 10 minutes, 0 sessions in last 30 minutes Virus caught: 0 total in 1 minute IPS attacks blocked: 0 total in 1 minute Uptime: 1 days,  17 hours,  50 minutes

get sys status Version: FortiGate-300E v6.0.3,build0200,181009 (GA) Virus-DB: 63.00130(2018-10-22 20:15) Extended DB: 63.00130(2018-10-22 20:15) Extreme DB: 1.00000(2018-04-09 18:07) IPS-DB: 6.00741(2015-12-01 02:30) IPS-ETDB: 13.00476(2018-10-19 00:46) APP-DB: 13.00476(2018-10-19 00:46) INDUSTRIAL-DB: 6.00741(2015-12-01 02:30) Serial-Number: IPS Malicious URL Database: 2.00131(2018-10-19 04:12) Botnet DB: 4.00332(2018-10-22 10:00) BIOS version: 05000007 System Part-Number: P21593-03 Log hard disk: Not available Hostname: Operation Mode: NAT Current virtual domain: root Max number of virtual domains: 10 Virtual domains status: 1 in NAT mode, 0 in TP mode Virtual domain configuration: disable FIPS-CC mode: disable Current HA mode: a-p, master Cluster uptime: 9 days, 12 hours, 25 minutes, 16 seconds Cluster state change time: 2018-10-23 15:26:24 Branch point: 0200 Release Version Information: GA FortiOS x86-64: Yes System time: Thu Oct 25 09:15:31 201

[Alexis_G]

Hi Keeping in touch with this forum, I see that EVERYONE who installed 6.0.x FortiOS encounter problems.

This FortiOS is very fresh. I would recomend to downgrade to latest 5.6 which is smooth.

[live89]

I think I will

Because this is not the only problem ..

We're migrating from SRX to this fortigate and we encountered ip conn error (A LOT) .. although the configurations seems to be OK .. some web application didn't run and we rolledback quikly

Anyway .. the memory on 36% is not a normal behaviour (in my opinion) but i need to be sure .. if anyone has an idea please advise

[neonbit]

36% memory isn't anything out of the ordinary. I have my 201E on 6.0.3 and it runs at about 34% memory with no traffic going through.

You should be alarmed when it starts reaching 70%.

[live89]

Hey neonbit

We connected the FGT to production and the memory went from 36% when it was not production to 37% in production . increased only by 1% when it is on almost 2700 current sessions . So I think you're right . Thanks .

Another thing , what does it mean 76% SPU ?