i have a problem wtih a fortigate 200F
Log of the console :
FortiGate-200F (11:59-01.19.2021)Ver:05000008Serial number:FG200FT921901705RAM activationCPU(00:00050665 bfebfbff): MP initializationCPU(01:00050665 bfebfbff): MP initializationCPU(02:00050665 bfebfbff): MP initializationCPU(03:00050665 bfebfbff): MP initializationCPU(04:00050665 bfebfbff): MP initializationCPU(05:00050665 bfebfbff): MP initializationCPU(06:00050665 bfebfbff): MP initializationCPU(07:00050665 bfebfbff): MP initializationTotal RAM: 8192MBEnabling cache...Done.Scanning PCI bus...Done.Allocating PCI resources...Done.Enabling PCI resources...Done.Zeroing IRQ settings...Done.Verifying PIRQ tables...Done.Boot up, boot device capacity: 28626MB.Press any key to display configuration menu................................
Reading boot image 3079118 bytes.Initializing firewall...System is starting...Starting system maintenance...Scanning /dev/sda1... (100%)Scanning /dev/sda3... (100%)batch descriptor error, exitbatch descriptor error, exit
Nothing more after it's stop booting
Thanks for your help in advance
Go to Solution.
Thanks a lot for your answer.
I did a recovery of the primary partition with the secondary partition and it worked.
View solution in original post
It looks like the Firmware is corrupted.Kindly format and load the firmware as per the below document.
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2023 Fortinet, Inc. All Rights Reserved.