Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
MORAMADAN
New Contributor III

Fortigate 1801F and supported SFP+ "Tengig"

Hello Bro,

               I have new deployment that include 1801F appliance and my question is that :

Does this appliance supports Cisco SFP "TenGig" tranceivers ? which part-IDs ? I have Few Cisco ones such as "Transceiver 10Gbase-SR PID: SFP-10G-SR-S" and I want to use if supported.

TIA to you all.

M.Ramadan
M.Ramadan
1 Solution
srajeswaran

Looks like the access is restricted, but the contents are almost similar to the list provided by Anthony earlier - https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/Fortinet_Transceivers.pdf

 

Again, since the transceiver is not in the list don't mean it won't work, it just means it is not tested by Fortinet. You can test them on your setup and see if it works , it is recommended to use the transceivers tested by Fortinet, which can be found in above document.

Regards,
Suraj
- Have you found a solution? Then give your helper a "Kudos" and mark the solution.

View solution in original post

8 REPLIES 8
Anthony_E
Community Manager
Community Manager

Hello,


Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.


Thanks,

Anthony-Fortinet Community Team.
MORAMADAN
New Contributor III

Thank you so much, and waiting for your response.

M.Ramadan
M.Ramadan
Anthony_E
Community Manager
Community Manager

Hi again,

 

I have found this list:

 

https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/Fortinet_Transceivers.pdf

 

May I ask you to have a look on it and tell if it answered your question?

 

Thanks a lot in advance.

 

Regards,

Anthony-Fortinet Community Team.
MORAMADAN
New Contributor III

Thank you so much for the link.

But obviously yhis is fortinet SFPS, I have many cisco sfps and I want to make sure if they are compatible and can be used.

M.Ramadan
M.Ramadan
srajeswaran
Staff
Staff

Hi Ramadan,

Fortigate tested and recommended transceivers are listed in KB article below. This list don't include the Cisco SPFs you have mentioned, but that doesn't mean it will not work, it is just not tested . There are customers using these SFPs in their Fortigates .

https://community.fortinet.com/t5/Internal-Knowledge-Base-Articles/Technical-Note-Fortinet-SFP-XFP-S...

 

Regards,
Suraj
- Have you found a solution? Then give your helper a "Kudos" and mark the solution.
MORAMADAN

Sorry, but when I open the link, its "access denied", how to open this link please.

M.Ramadan
M.Ramadan
srajeswaran

Looks like the access is restricted, but the contents are almost similar to the list provided by Anthony earlier - https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/Fortinet_Transceivers.pdf

 

Again, since the transceiver is not in the list don't mean it won't work, it just means it is not tested by Fortinet. You can test them on your setup and see if it works , it is recommended to use the transceivers tested by Fortinet, which can be found in above document.

Regards,
Suraj
- Have you found a solution? Then give your helper a "Kudos" and mark the solution.
MORAMADAN
New Contributor III

I have received this link and all are fortinet parts, but I will consider that you have pple that are using it and working fine, and this is just tested parts as a solution.

Thank you all

M.Ramadan
M.Ramadan
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors