Fortigate 100F power supply status

[Sytec]

Hello,

on Fortigate 100F how I can monitor the PSU state without execute a commenad in a shell? When a PSU is disconnected the system LED should be amber?

I tried to disconnect one of the PSU and I not have any alarms from the hardware led and also in the GUI.

Thank you.

[funkylicious · Accepted solution]

hi,

https://community.fortinet.com/t5/FortiGate/Technical-Tip-Checking-FortiGate-100F-series-power-suppl... 

you can monitor PSU via SNMP

https://community.fortinet.com/t5/FortiGate/Technical-Tip-SNMP-OID-fgHwSensorEntValue-behavior-chang...

https://community.fortinet.com/t5/FortiGate/Technical-Tip-SNMP-OIDs-to-poll-power-supply-fan-and-tem...

or try looking into System Events for any specific events when you disconnect the PSU maybe create a automation stitch/notification for when that message occurs again to send an email.