Fortigate 100F HA Out-Of-Sync - Tables out of sync ips.sensor

[tehm]

Hi all.

Ive been setting up brand new Fortigate 100F.

There is only one cable between them: HA port 1 to HA port 1.

However it keep saying out of sync because of the table  ips.sensor.

I have seen this before on 70F aswell. 

Im running v7.2.8 build1639 (Mature)

I have tried to recalculate #diagnose sys ha checksum recalculate but no result.

[Brunn3r · Accepted solution]

Try to change something in the ips.sensor configuration.
recalculate the checksum on both nodes.

[tehm]

I made one small change in one of the default IPS profiles, and that worked. Thanks