When user try to connect VPN, he can't select any options in his interface. It's like everthing had freeze and he's unable to select anything. How can we solve this? The version he use is the 6.0.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi DanLima,
you should check the exact behaviour, does the client unfreeze after a minute or so? I would then think it is trying to authenticate and fails. During that time it does not respond.
Logs of the client might have a better view.
Quick shot is of course to upgrade the client. The latest is the 7.0 in between there are 6.2 and 6.4 branches.
Best regards,
Markus
Hi Markus_M,
Thanks for answering as soon as possible. The only thing that worked to reable the user panel was rebooting the system. In one of thoses cases, we had to reboot 4x times to make it work.
I talked with TI admin about the new versions of the client and they'll see if it's possible to change. If you know something to helps us, I appreciate.
Thanks again.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1531 | |
1028 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.