I have this problem with few remote users of my company. But its very urgent to give him sslvpn access to have work from remote location any time. But when they try to connect forticlient sslvp stop at 98% & disconnect. I have tried uninstalling & reinstalling application, also tried different versions, disabled windows firewall, antivirus and unchecked IPV6 but still no luck. Please tell me the correct solution. I am sick of thisissue.
asad khan
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello,
Can you please show us the SSL VPN configuration.
Regards
Bikash
Hello,
Can you please show us the SSL VPN configuration.
Regards
Bikash
Hello
This usually depending on antivirus or host firewall on the client side, have you tried to reinstall Forticlient ?
Are you running McAfee HIPS by any chance ?
I had an issue with similar symptoms and it was due to HIPS.
Dear All thanks for yours suggestions,
The Configuration is perfect. I have many other users also, for which the same configuration is working fine. IPsec Client is working fine for the same user. But only the problem is with sslvpn. Actually it is remote user(consultant), and he has Antivirus "kaspersky" in his laptop. And weird thing is that it was working fine for last couple of days, before this.
Even i have discussed with Fortinet TAC also, but i haven't find the right solution untill now.
asad khan
I am sure you have already looked at this but just in case it is helpful I have found that in all cases when our VPN's have issues at 98% it is username and password related.
Hi nathan.emerson,
I am very used to Foritclient application. When you have a username or password issue, it will stuck at 80% mostly, and you will get an error message i.e. unable to login to server....... and the error code/number is (-12). So which is something very clear.
Also i am sure that 98% error are totally related to End user (client machine). But i am unable to find the correct cause and solution for this on client pc.
Thanks
asad khan
asad.khan1 wrote:Also i am sure that 98% error are totally related to End user (client machine). But i am unable to find the correct cause and solution for this on client pc.
When our company moved from Windows XP to Windows 7, our in-house apps (including some off the shelf software) broke. In those cases we used Process Monitor to troubleshoot/debug those applications. (Mind you, we have been using Process Monitor long before Windows 7 came along since our company uses a custom software packager to deploy apps company-wide, and sometimes had to be debugged.) In about 70% of the time apps that didn't work on Windows 7 was due to a user read/write permissions to the %root%\temp\ folder or path to programs folder location was wrong.
While Process Monitor may or may not be something you'll want to try, here are some other suggestions:
- switch users on the laptop and see if sslvpn works (possible corrupted user profile)
- create a new user profile
- try a different username/password
- try same username/password from another computer/laptop.
BTW it was Process Monitor that clued me in to the ghost network interfaces issue with the forticlient.
NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
asad.khan1 wrote:Hi nathan.emerson,
I am very used to Foritclient application. When you have a username or password issue, it will stuck at 80% mostly, and you will get an error message i.e. unable to login to server....... and the error code/number is (-12). So which is something very clear.
Also i am sure that 98% error are totally related to End user (client machine). But i am unable to find the correct cause and solution for this on client pc.
Thanks
Sorry Asad, to be more specific in my case and in most occurrences of issues at 98% it has been the user AD account not being a member of the VPN users group configured in NPS or a miss-configuration in NPS for a group.
Cheers,
Nathan
Hello,
I have the same issue and the problem is at the client machine. In my case, the client machine is a Windows Server 2012.
If I try with the same user in my W7 desktop it works fine.
I've checked the post about the ghost Interfaces and I have removed the Interface empty but it doesn't works.
Some Idea?
Thanks.
Carlos
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1709 | |
1093 | |
752 | |
446 | |
231 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.