Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
bdbogus
New Contributor

Forticlient keeps asking for Smart Card

I'm using the latest and greatest Forticlient (ver 5.2.2.0624) and I also have installed certificates from a Smart Card I use for other business. However, when I open the the Forticlient and try and use the SSL-VPN, I'll immediately get a prompt to install the smart card. I've verified that "Client Certificate" is NOT checked on the connection settings yet it continues to want and check the client certificates from the Smart Card. Need to find a way to get the Forticlient to NOT check for them without effecting the installed Smart Card certificates.

2 Solutions
Alivo__FTNT
Staff
Staff

Hi everyone,

 

this issue is planned to be resolved in FortiClient 5.2.4

 

Best Regards,

Pavel

 

livo

View solution in original post

iseutens
New Contributor II

This works solution works.

 

    + Export the FortiClient XML configuration file:

        - in FortiClient GUI, select the File -> Settings menu item

        - click the Backup button

        - provide a file name and directory location

    + Edit the exported configuration file. Add the XML element:

      <show_auth_cert_only> in the <vpn> section. Set the value to 1.

      Please see pages 33 and 36 of the document:

 

        FortiClient XML Reference

        http://docs.fortinet.com/uploaded/files/2076/forticlient-xml-52.pdf

 

    + Import the modified configuration file back into FortiClient,

      using the Restore button in the File -> Settings page.

 

 

View solution in original post

13 REPLIES 13
iseutens
New Contributor II

Thanks Pavel,

That's good news.

Do you know when this  new version will be released?

iseutens
New Contributor II

This works solution works.

 

    + Export the FortiClient XML configuration file:

        - in FortiClient GUI, select the File -> Settings menu item

        - click the Backup button

        - provide a file name and directory location

    + Edit the exported configuration file. Add the XML element:

      <show_auth_cert_only> in the <vpn> section. Set the value to 1.

      Please see pages 33 and 36 of the document:

 

        FortiClient XML Reference

        http://docs.fortinet.com/uploaded/files/2076/forticlient-xml-52.pdf

 

    + Import the modified configuration file back into FortiClient,

      using the Restore button in the File -> Settings page.

 

 

nicolecurioni

Thanks for the workaround. I've tried uploading the edited XML file into the program via CLI, because I cannot open the program normally (since i'm getting the silly Smart Card error). But for some reason, while trying to run the FortiClient.exe into the command prompt i'm getting Acces Denied. (yes i'm using Admin user).

 

Any ideas? Thanks a lot!

kwik
New Contributor

Hi Pavel,

 

When will FortiClient 5.2.4 been released?

I've tried the workaround, but I still have the same annoying Smart Card messages.

Labels
Top Kudoed Authors