Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
si_young
New Contributor

Forticlient issues

Hello

 

We are experiencing a strange issue where endpoints (Usually servers) are randomly dropping the NIC's when Forticlient is installed and the only way to bring them back is to enable/re-enable the NIC or reboot (We are also noticing major performance issues). We have Forticlient 5.6 and all clients are registered with an EMS version 1.0.5.0132.  This is a freshly rolled out solution. Things I have tried are.....

 

1. Uninstalled and re-installed. 2. Disabled all functions one at a time and tested. 3. Disabled compliance.

4. Been through Windows logs. 5. Uninstall Forticlient - ONLY THING THAT FIXES THE ISSUE.

 

Not really sure what else to try. Anyone else seen this issue or got any ideas?

 

Cheers,

S.

1 Solution
Sebastiaan_Koopmans

@Si.Young EMS 1.2.1 is out so maybe that could be an solution? otherwise try Forticlient 5.4.3 with EMS 1.05. Dont have this issues here with that combination.

FortiAnalyzer / 6.4.0

FortiClient / 6.2.6 FortiClient EMS VM / 6.2.6

FortiGate 300D HA 6.2.4 FortiGate 500E HA 6.2.4 FortiGate 30E / 60E / 100E / 6.0.9 FortiMail VM HA / 6.4.0 FortiSandbox VM / 3.2.0

FortiWeb VM / 6.3.2

FortiManager VM / 6.4.0

View solution in original post

FortiAnalyzer / 6.4.0 FortiClient / 6.2.6 FortiClient EMS VM / 6.2.6 FortiGate 300D HA 6.2.4 FortiGate 500E HA 6.2.4 FortiGate 30E / 60E / 100E / 6.0.9 FortiMail VM HA / 6.4.0 FortiSandbox VM / 3.2.0 FortiWeb VM / 6.3.2 FortiManager VM / 6.4.0
4 REPLIES 4
Travis
New Contributor

I have had some similar issue with the 1.0.5 and 5.4.1

I have also had some issues with FortiClient reporting correctly to FortiAuthenticator.

 

I still have not gotten a satisfactory resolution. 

 

Have you had any luck?

Network Administrator Technical Consumer Products, Inc.

Network Administrator Technical Consumer Products, Inc.
Sebastiaan_Koopmans

@Si.Young EMS 1.2.1 is out so maybe that could be an solution? otherwise try Forticlient 5.4.3 with EMS 1.05. Dont have this issues here with that combination.

FortiAnalyzer / 6.4.0

FortiClient / 6.2.6 FortiClient EMS VM / 6.2.6

FortiGate 300D HA 6.2.4 FortiGate 500E HA 6.2.4 FortiGate 30E / 60E / 100E / 6.0.9 FortiMail VM HA / 6.4.0 FortiSandbox VM / 3.2.0

FortiWeb VM / 6.3.2

FortiManager VM / 6.4.0

FortiAnalyzer / 6.4.0 FortiClient / 6.2.6 FortiClient EMS VM / 6.2.6 FortiGate 300D HA 6.2.4 FortiGate 500E HA 6.2.4 FortiGate 30E / 60E / 100E / 6.0.9 FortiMail VM HA / 6.4.0 FortiSandbox VM / 3.2.0 FortiWeb VM / 6.3.2 FortiManager VM / 6.4.0
emnoc
Esteemed Contributor III

I would 1st read  the rls notes for  EMS 1.0.5 & 1.2.1 and any issues   and then the same with  FC versions rls notes and any supported issues.

 

Than open a ticket with  FTNT-TAC.

 

ken

 

PCNSE 

NSE 

StrongSwan  

PCNSE NSE StrongSwan
MtnGoat
New Contributor

Noobies first post. Rolled out a 50E with 5 clients using ver 5.6.2.1117. My 3rd party software vendor updated his software that was crashing the VPN connection. He has since rolled back his update. Just wondering if others have had problems with the latest FC version. Thanks

 

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors