Forticlient and smart card

[jfm2038]

Hi!

I use Foticlient to acces to my corporate network.

My private certificate is installed in a smart card USB (Yubikey NEO) in the PIV applet.

I have the problem when the VPN client make the conection that ask me many times the PIN, because the serveral conection stages of the client. The question is: there are any solution for that the client ask me the PIN only the first time only in each connection?

I work with Windows 7/x64 Thanks in advance. Best regards.

[Chris_Lin_FTNT]

What version of FortiClient are you using? IPSec or SSL?

FortiClient 5.2.5 is the latest release. You can give it a try.

[jfm2038]

Thanks for your response.

I had an older version of FortiClient and I updated it to the 5.2.5 version. I use a VPN SSL connection.

But the problem persists. When I use the smart card with my certificate, it asks me up to 7 times the PIN in the connection process.

Any idea?

Bests regards.

[hohosecure]

I saw this on their KB, does it help? http://kb.fortinet.com/kb...amp;externalId=FD37525 HoHo

[jfm2038]

Thanks again. I tried your advice, but it didn't work. I use a VPN SSL and I think is a IPSEC only parameter.

Another option?. Thank you very much.