Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
it21
New Contributor

Forticlient SSL VPN does not work with MacOSX

We have a Fortigate 5.0 firewall and a VPN ssl Configuration, this vpn works with Windows without problems, but with macosx 10.7/8/9 we have trouble. After Client installation on the mac (5.2) we made the same config as in the windows client but when we try to connect we got an error,that there is not enough information for connect, please check User password or certificate.

On the mac console we saw these message

 

 04.11.14 11:41:18 [0x0-0x3c23c2].com.fortinet.FortiClientAgent[5679] klist: No credentials cache found while getting the ccache principal

 

 

But ridiculous ist, that on some Macclients it switched from work to not work, that means on some mac clients i could connect thru vpn, some minutes later we got an error message.

1 Solution
Mark_Oakton
Contributor

is the certificate fully trusted?

Infosec Partners

View solution in original post

Infosec Partners
2 REPLIES 2
Mark_Oakton
Contributor

is the certificate fully trusted?

Infosec Partners
Infosec Partners
it21
New Contributor

Hi folks,

the problem is solved. The Problem was that  the  firewall runs out of memory and switched in conservation mode. So these was the effect  that sometime it works and a little later not.

I checked the memory and found that the ipsengine use nearly 20 -30 % of the memory. After a firmware upgrade the engine now uses 5-10 % of memory

Labels
Top Kudoed Authors