Forticlient EMS deployment on FortiGate virtual cluster environment

[Tango1]

Hi

In a virtual cluster FortiGate setup, I have 2 VDOMs used for vpn termination. One is in vcluster1 and other one is in vcluster2. Management VDOM is in vcluster1. Both firewalls are configured as fabric devices on EMS. I am seeing an issue on vcluster2 VDOM that endpoints are not getting EMS tags. Also, Device inventory wizard shows that multiple users are logged into same device on both VDOMs. Does anyone see this issue?

Thanks

[Richie_C]

Hi Tango

With vcluster, if traffic must go through 2 VDOMs, they must belong to the same Vcluster.

However, you can cofigure per-vdom EMS. See the following article:

https://docs.fortinet.com/document/forticlient/7.2.4/ems-administration-guide/160727/configuring-for...

This will require FortiGate to be running FortiOS 7.4.

I hope it helps