I have to migrate dozens of VPNs from free Forticlient to Forticlient connected to an EMS server 7.0.7.
I need the VPNs, of the IPSEC type, to start automatically when the various devices, all Android, switched on.
The problem is that the only way to do it seems written in this old guide: https://community.fortinet.com/t5/FortiClient/Technical-Tip-FortiClient-EMS-Auto-connect-a-VPN-Tunne... where it says "Note: Auto-connection settings are only set on FortiClient only after first tunnel connection."
I actually can't add the lines I need in phase 1:
set auto connect enable
set keep-alive enable
set save-password enable
FGT-Master#config vpn ipsec phase1-interface
FGT-Master (phase1-interface) #edit VPN_ANDROID_EMS
FGT-Master (VPN_ANDROID_EMS) # set client-auto-negotiate enable
command parse error before 'client-auto-negotiate'
If in EMS server I select the Autoconnet, Save Password fields, they are not applied if in phase 1 there aren't the three previous strings.
Is it possible that in firmware 6.2.12 it is still not possible to insert these strings on existing VPNs? Do I need to recreate all VPNs?
I want to clarify that by creating the VPN from zero, as written in the guide, everything works.