I have to migrate dozens of VPNs from free Forticlient to Forticlient connected to an EMS server 7.0.7.
I need the VPNs, of the IPSEC type, to start automatically when the various devices, all Android, switched on.The problem is that the only way to do it seems written in this old guide: https://community.fortinet.com/t5/FortiClient/Technical-Tip-FortiClient-EMS-Auto-connect-a-VPN-Tunne... where it says "Note: Auto-connection settings are only set on FortiClient only after first tunnel connection."I actually can't add the lines I need in phase 1:
set auto connect enableset keep-alive enableset save-password enable
FGT-Master#config vpn ipsec phase1-interfaceFGT-Master (phase1-interface) #edit VPN_ANDROID_EMSFGT-Master (VPN_ANDROID_EMS) # set client-auto-negotiate enablecommand parse error before 'client-auto-negotiate'If in EMS server I select the Autoconnet, Save Password fields, they are not applied if in phase 1 there aren't the three previous strings.
Is it possible that in firmware 6.2.12 it is still not possible to insert these strings on existing VPNs? Do I need to recreate all VPNs?I want to clarify that by creating the VPN from zero, as written in the guide, everything works.
Thank you for using the Community Forum.
I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.
We are still looking for someone to help you.
We will come back to you ASAP.
I found this documentation:
Could you please tell me if it is helping?
my VPN is of the IPSEC type, I have already read all the manuals
but I don't think I have seen how to add these three commands on an existing VPN IPSEC:
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2023 Fortinet, Inc. All Rights Reserved.