Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
pestevens
New Contributor II

Fortianalyzer 7.4.3 - UI not load, after firmware update

Hi,
I need same help, after system upgrade fortianalyzer to 7.4.3 gui not work.
I have available disk space, the settings are all correct according to the previous version.
 

_fortianalyzer_Jun2024.png

 

 
1 Solution
pestevens
New Contributor II

Apparently, after a brief call with support, we realized that the problem is at the origin of the superuser profile. The user profile with superuser has issues accessing the configuration, alternatively we created a new profile and a new user and the UI became available.

View solution in original post

9 REPLIES 9
spoojary
Staff
Staff

Clear your browser cache and cookies to ensure that the updated GUI files are loaded correctly.  Restart the FortiAnalyzer services to ensure all components are running properly after the firmware update.

Siddhanth Poojary
pestevens
New Contributor II

I've already tested it on several machines with different browsers and I'm still unsuccessful.

I've already reloaded the server and I'm still unsuccessful.

pestevens
New Contributor II

The upgrade was successful. After the upgrade to version 7.4.3 is completed, the dashboard (GUI) does not load.

smkml
Staff
Staff

Hi @pestevens ,

 

Can you try to use https://10.100.75.16/p/login/ ?

pestevens
New Contributor II

I had already tested it but was unsuccessful.
Login is done successfully via browser or even via CLI (ssh),the gui environment does not appear.

mpapisetty
Staff
Staff

@pestevens 

If the issue started after an upgrade, do check if the RAM (16GB atleast) and vCPU requirements have changed from an older version - 

https://docs.fortinet.com/document/fortianalyzer/7.4.3/release-notes/747160/management-extension-app...

 

 

-Manoj Papisetty
jasonhong
Staff
Staff

If you are able to access the FAZ via console/ssh, you can try to run the following command to perform a disk health check and verify if the GUI is accessible upon reboot.

 

# diagnose system fsck harddisk

mæbe
New Contributor

I am experiencing the same thing when logging in with TACACS in combination with ext-auth-accprofile-override enabled on the TACACS admin account. I can login successfully, even confirmed when debugging, but after login the page is just blank.

 

If I disable ext-auth-accprofile-override or using the local admin account it works just fine.

 

Maybe this is what you are experiencing as well?

pestevens
New Contributor II

Apparently, after a brief call with support, we realized that the problem is at the origin of the superuser profile. The user profile with superuser has issues accessing the configuration, alternatively we created a new profile and a new user and the UI became available.

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors