Hello,
I have this query. From Fortianalyzer, if I forward logs to two syslog servers (SIEM, network syslog server separately) will it cause any impact to Fortianalyzer resources?. We are using Fortianalyzer VM environment, expected logs per second is around 8000 logs/sec. All these 8000 logs will be forwarded to couple of servers, will it cause any impact to Resources (RAM/CPU). I understand, since this is just log forwarding , it shouldn't stress much like doing index locally. Your suggestion/feedback on this?? Currently for 8000logs/sec we have considered 16 GB RAM/8 CPU core as per Fortinet suggestion in their website
Regards
Raja
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello Raja,
Thank you for using the Community Forum.
I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.
Regards,
Hello Raja,
We are still looking for an answer to your question.
Once We will get it, we will provide it to you.
Regards,
Hi Raja,
Could you please indicate us which version you are using?
Regards,
Hi, It is 7.0.4 version.
Regards
Raja
Hello Raja,
Thanks a lot!
We will come back to you as soon as we find a solution.
Regards,
Raja,
I have found the document for your version:
https://docs2.fortinet.com/document/fortianalyzer/7.0.4/administration-guide/621804/log-forwarding
Could you please tell me if this document is helping?
Regards,
Hi, Thanks for your reply. This URL is not helping much with the information I am looking for.
Can't really provide you an answer to your specific question; however, I can offer some insight to my environment and maybe that will help. I also run mine on a VM as well, but using Hyper-V; however, minimum system requirements look to be the same. At 8000 logs/sec, it shows me 16GB of RAM and 8 CPU cores. I doubled this to be on the safe side of things, so I'm running mine at 32GB RAM and 16 CPU cores. Originally, I had mine set to those minimum requirements and my storage infrastructure was spindle based SATA (a few years back). I had nothing but issues with this setup, mostly due to the added processor tax on the slower storage subsystem. Once I doubled the RAM and CPU cores (how I have it now) and replaced my spindle SATA based storage (RAID10) to SSD storage (RAID10), life has been fine outside of minor code bugs encountered. My typical average CPU during the workday runs about 28% and memory is at 30% usage.
I would imagine in your situation, incorporating an additional NIC to use as your outgoing interface might be beneficial, thus one NIC for ingress logs and one NIC for egress logs. Give that a shot and after a few days, you can make tweaks if need be...great thing about using a VM in that you can adjust RAM and CPU easily enough (assuming you have the resources to pull from). Again, make sure your storage sub-system is on point as well.
Hi @Cajuntank That's very useful insight.. In my case CPU/RAM looks to be normal.. But I can try having two NICs.. One for receiving and another interface for forwarding. This is a good suggestion, will try and update..
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1633 | |
1063 | |
751 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.