Hi,
I have setup a VPN site to site with a fortigate 40F and a fortiwifi 40C (FortiOS 5.2). The main problem is I have 2 laptops.
The first one all the traffic is going to the tunnel but the second one, the traffic is sent to WAN1.
The 2 laptops are in the same segment (192.168.11.20x)
I don't understand what is happening. The policy is correct from Wifi to tunel (Source: All Destination: All)
I have created the static route 0.0.0.0/0 to the tunnel.
I have remarked also I have to set the priority tunnel with the same number as the WAN1 interface. If not the VPN is not going up.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi Hakim,
I am assuming you are trying to reach the same destination on both laptop during the test, right?
Are you able to run the 'diag debug flow' command for us?
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1696 | |
1091 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.