Hello everyone,
I have a FortiWiFi device where I’ve configured 3 SSIDs as follows:
veone air: DHCP pool 192.168.10.10 – 192.168.10.254, operating in tunnel mode
veone tech: DHCP pool 192.168.20.10 – 192.168.20.254, operating in tunnel mode
veone voip: DHCP pool 192.168.30.10 – 192.168.30.254, operating in tunnel mode
I’m able to connect to these SSIDs from my computer and complete my tasks without any problems.
Today, I received a PBX server that needs to be connected to the FortiWiFi on the internal4 port. The server requires a static IP address 192.168.30.3/24, which belongs to the same subnet as the veone voip SSID’s DHCP pool. This setup should allow me to ping the PBX server from devices connected to the veone voip SSID.
However, even though the PBX server is physically connected to the FortiGate’s internal4 port and assigned the static IP address manually, I am unable to ping it from the SSID network.
Could someone please advise on how to configure the FortiWiFi or what changes I need to make to enable communication between the veone voip SSID and the PBX server on internal4?
Thanks in advance for your help!
Solved! Go to Solution.
Hi Sidik
If I understand well your requirement I think you are looking for this:
Hi Sidik
If I understand well your requirement I think you are looking for this:
thank @AEK
User | Count |
---|---|
2637 | |
1400 | |
810 | |
678 | |
455 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2025 Fortinet, Inc. All Rights Reserved.