FortiVoice to CUCM SIP trunk

[most_ahdy]

Hi,

   I wonder if some has experience in establishing a SIP trunk between FortiVoice and Cisco Call Manager?

[Jean-Philippe_P]

Hello most_ahdy, 

Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible. 

Thanks, 

[Anthony_E]

Hello,

We are still looking for someone to help you.

We will come back to you ASAP.

[Anthony_E]

Hello,

May I invite you to have a look at this document?:

https://docs.fortinet.com/document/fortivoice-enterprise/7.0.1/fortivoice-phone-system-administratio...

Regards,

[most_ahdy]

I had a look to this section of administration guide, but it did not work with a sip trunk, but worked only using custom office peer.

I am in a testing phase, to ensure that all are ok,

but I wonder if anyone has experience in integrating Cisco Cucm with FortiVoice, 

I need to route calls from Fortivoice specific extensions to CUCM specific PSTN gateway, so the call routing in CUCM will be based on Fortivoice caller number, any body has this scenario?

[jburk]

Are you still needing help on this? I have done this configuration several times.

[Hamzeh]

Hello Jburk, 

I'm kind of new to the voice world and I was looking for an answer to similar question, can we integrate any SIP server such as CUCM or from any other vendor with FortiVoice and is the right way to do it would be by creating a SIP trunk port between the two local SIP servers?

If so, is there a guide we can follow? I've been reading some guides and I didn't anything helpful. 

I'd truly appreciate your input on this one.