In FortiVeiw > Summary View > Top Source:
Some users show their IP address as source. I mean their IP address only.
But some have their username like "192.168.1.71 (nakahira)" beside it. What is the reason?
And in that case, they have human shaped icon on the leftside.
What dose this mean?
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi, it means username information is recorded in FCT logs for these connections, user has enabled authentication such as FSSO in the FGT.
Regards,
hz
Thank you for your reply
Where those values "(user name)" actually comes from?
I have checked Fortigate unit and found that SSL remote access and local user authentication are enabled.
And I found that the FGT detected "teiji-k@...ne.jp" as user name, which is also recognized as
"192.168.1.240(teiji-k@...ne.jp)" in the Fortianalyzer logs.
It is just an e-mail address set in Thunderbird..
little bit confused..
Thanks in advance.
Dear All,
Just to add we are also getting the same issues. I use FGT & FAZ. We are using FSSO and on the FAZ Report sometime the FSSO username is displayed, sometimes by ip address. Some occasions the same user is accounted twice by either his or her fsso username or pc ID.
Any feedback plz
Thank you Silver
Dear Experts, Please give us some hints.
If the fortigate has intergrated with any of the directory service through FSSO , LDAP or RADIUS ,then you will get the username in reports and fortiview.
You can check the user status in User- Monitor module.
If you are using device discovery in interface ,it sniffs the machine details ( Name ,Device type , username etc)
And I found that the FGT detected "teiji-k@...ne.jp" as user name, which is also recognized as "192.168.1.240(teiji-k@...ne.jp)" in the Fortianalyzer logs.
If you have device detection enabled on FGTs and no other definitive user identity info available (eg. FSSO or firewall authenticated users...), the FGTs can learn some un-official identities from the devices such as the email login teiji-k@...ne.jp etc and write the info to the traffic log. FAZ will use this information for reports.
From the CLI:
#'diagnose user device list'
will show how the device or user was identified. Look for "src" after the user or device.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1692 | |
1087 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.