FortiToken mobile push on dynamic IP

[Stoo]

Hi everyone. I have a fortigate 61E. Running 6.2.3. I’m wanting to setup mfa using the fortitokens but the ftm push setting in the cli only supports IP addresses for the wan interface. I don’t have a static IP so how can I set it up to use the dynamic dns address instead? Or is that not possible? Thanks.

[xsilver_FTNT]

Hi,

AFAIK it is not possible at the moment.

[kelleycomputing]

It looks like this is possible in FortiOS 7.2.3 using a DNS name (e.g., FortiDDNS) using something like: 

config system ftm-push
    set server example.fortiddns.com
end