Hi all,
I have added one FortiSwitch, but it always offline, how to get it online?
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi @focus11 ,
Have a look at this troubleshooting guide as it might help :
Is "auto-discovery-fortilink" enabled on the interfaces members of the fortlink?
Hi @focus11
Try to plug the cable from FortiGate to FortiSwitch in a port with FortiLink logo.
And ensure that the FG port that is connected to the switch is included in your FG's FortiLink interface.
this was no FortiLink logo in my switch
Hi Focus
Then on your Fortiswitch do the following on the port id connected to FortiGate:
config switch interface
edit portX
set auto-discovery-fortilink enable
end
Hello
I would suggest you to please factory reset the switch (exe factoryreset) and follow the link to add the switch again:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-add-connect-FortiSwitch-to-FortiGat...
Thank you!
Hi @focus11,
Have you tried different cables and different ports? Do you see any link lights?
Regards,
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1640 | |
1066 | |
751 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.