FortiSwitch Optical Power

[cbrizzell]

I'm looking to see if there is a way on a FortiSwitch (version 7.4.2) to view the current rx and tx optical power level for the SFP module.

We are having some unusual issues and am trying to figure out if I have a bad fiber or possible bad optic

[ozkanaltas · Accepted solution]

Hello @cbrizzell ,

You can use this command for sfp optical power information. 

get switch modules status <PORT_NAME>

Example output : 

FS1E48T419000004 # get switch modules status port50
____________________________________________________________
Port(port50)
temperature      23.957031 C
voltage          3.293100 volts
alarm_flags[0]   0x0000
warning_flags[0] 0x0000
laser_bias[0]    0.761600 mAmps
tx_power[0]      -2.246809 dBm
rx_power[0]      -2.926854 dBm
alarm_flags[1]   0x0000
warning_flags[1] 0x0000
laser_bias[1]    0.755200 mAmps
tx_power[1]      -1.993517 dBm
rx_power[1]      -3.300326 dBm
alarm_flags[2]   0x0000
warning_flags[2] 0x0000
laser_bias[2]    0.761600 mAmps
tx_power[2]      -2.105603 dBm
rx_power[2]      -2.486439 dBm
alarm_flags[3]   0x0000
warning_flags[3] 0x0000
laser_bias[3]    0.748800 mAmps
tx_power[3]      -2.128939 dBm
rx_power[3]      -2.641617 dBm
options          0x000F ( TX_DISABLE TX_FAULT RX_LOSS TX_POWER_LEVEL1 )
options_status   0x0008 ( TX_POWER_LEVEL1 )

[cbrizzell]

Thank you for that - exactly what I wanted.