FortiSwitch MCLAG ICL and FortiGate

[ac1]

Hi guys,

I configured an infrastructure with 2 FortiGate Active-Passive and 2 FortiSwitch 1024D. 

The MCLAG is active and the network work. But I have a question.

In a second moment I see this document.

Is it necessary replicate the configuration of MCLAG on configuration of FortiGate?

 

config switch-controller managed-switch

edit "<switch-id>"

config ports

edit "<trunk name>"

set type trunk

set mode {static | lacp-passive | lacp-active}

set bundle {enable | disable}

set members "<port>,<port>"

set mclag {enable | disable}

next

end

next

[orani · Accepted solution]

No this is a configuration to create an agregate interface to connect a server or any other device using more than one cable

[ac1]

Ahhn ok. I misanderstood the guide. Thanks