Hi, I have a FortiSwitch 124F-FPOE working with a PFSense FW where I have VLANS created. The problem is, from VLAN I can't reach the FortiSwitch via HTTPS or ICMP. Couldn't find any configuration to restrict the IP range from you can connect to the switch. Any help?
Thank you
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Do you have a default route setup on the FortiSwitch so you can access it from other subnets?
Hi, thank you, but I couldn't find any default route setup.
Hi Matias,
Is it only https and icmp, is ssh working?
If you have created layer3 vlans on the switch, please check on SVI if the protocols are allowed. https://docs.fortinet.com/document/fortiswitch/7.2.1/administration-guide/626301/switch-virtual-inte...
Also, are the vlans tagged on both FW and FSW uplink port/internal interface?
Following
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1643 | |
1069 | |
751 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.