Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Matias
New Contributor

FortiSwitch Access from different VLAN

Hi, I have a FortiSwitch 124F-FPOE working with a PFSense FW where I have VLANS created. The problem is, from VLAN I can't reach the FortiSwitch via HTTPS or ICMP. Couldn't find any configuration to restrict the IP range from you can connect to the switch. Any help?

 

Thank you

4 REPLIES 4
mlebron
Staff
Staff

Do you have a default route setup on the FortiSwitch so you can access it from other subnets?

Matias
New Contributor

Hi, thank you, but I couldn't find any default route setup.

sachitdas_FTNT

Hi Matias,

Is it only https and icmp, is ssh working?

If you have created layer3 vlans on the switch, please check on SVI if the protocols are allowed. https://docs.fortinet.com/document/fortiswitch/7.2.1/administration-guide/626301/switch-virtual-inte...

 

Also, are the vlans tagged on both FW and FSW uplink port/internal interface?

 

 

Regards,
Sachit Das
ETAC Engineer
Wifi-Switching – International Support
AGMP
New Contributor II

Following

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors