FortiSwitch Access from different VLAN

[Matias]

Hi, I have a FortiSwitch 124F-FPOE working with a PFSense FW where I have VLANS created. The problem is, from VLAN I can't reach the FortiSwitch via HTTPS or ICMP. Couldn't find any configuration to restrict the IP range from you can connect to the switch. Any help?

Thank you

[mlebron]

Do you have a default route setup on the FortiSwitch so you can access it from other subnets?

[Matias]

Hi, thank you, but I couldn't find any default route setup.

[sachitdas_FTNT]

Hi Matias,

Is it only https and icmp, is ssh working?

If you have created layer3 vlans on the switch, please check on SVI if the protocols are allowed. https://docs.fortinet.com/document/fortiswitch/7.2.1/administration-guide/626301/switch-virtual-inte...

Also, are the vlans tagged on both FW and FSW uplink port/internal interface?

[AGMP]

Following