Hello,
I rebooted my 108D-POE and now it isn't working anymore. Only port 1 shows a green light when I put a cable in it. All the other ports show a fade amber light (see picture). It does not respond when a cable is inserted.
The reset button does not work. After 10-15 seconds nothing happens. Port 1 replies to ip 192.168.1.99 but I cannot start the GUI.
Any ideas?
Regards,
Albert
If it's got an external power supply you could test a replacement PSU. I suspect the PSU has failed. Open a support case anyway.
HI All,
Thanks for the replies. I used an RMA to replace the switch.
Thanks.
Albert
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.