a little disappointed..
no enhancements..
it's just a bugs fixed release....
[size="5"]definitely 1 of terrible f/w for FOS...[/size]
UNSTABLE GUI
[size="6"]ANNOYING SSL VPN problem..............[/size]
[size="3"]fortinet, I think you must quickly push out next fixed release or give some explains.........[/size]
201508020844, CSB-150730-1-Partial-Config-Loss
FortiGate models listed below may lose configuration pertaining to IPsec interface, virtual access point interface, loopback interface, or virtual-switch interface after a reboot when the FortiGate is deployed with FortiOS 5.2.4 with build number 0688 and time 150722.
FGT20C3X12000161 # get sys stat
Version: FortiGate-20C v5.2.4,build0688,150722 (GA)
Potentially Affected Products:
FortiGate: FG-20C, FG-20C-ADSL, FG-30D, FG-30D-PoE, FG-40C
FortiWiFi: FW-20C, FW-20C-ADSL, FW-30D, FW-30D-PoE, FW-40C
Resolution:
FortiOS 5.2.4 software images for the models above have been rebuilt and re-posted on the customer support web site with build number 0688 and time 150730.
FWF60D x2 FWF60C x3 FGT80C rev.2 FGT200B-POE FAP220B x3 FAP221B x2
FSW224B x1
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Why does this keep happening? Fortinet makes such great hardware, but they have seriously burned some of us with bad firmware releases. I'm a constant Fortinet advocate, but this kind of crap demonstrates a lack of QC and concern for the customer environment. These type of issues should definitely be exposed by a good QC system and if the firmware has the potential to wipe a config, for godness sakes it should not be released. Those of us who are long time Fortinet customers have learned to be wary of new releases and to always reboot the appliance, take a back up, and wait for others to expose the bugs, but it doesn't need to be that way with the right internal controls at Fortinet. Pick up the slack guys. You make a great product but you are tripping over your own feet when you release builds like this.
dfollis wrote:Why does this keep happening? Fortinet makes such great hardware, but they have seriously burned some of us with bad firmware releases. I'm a constant Fortinet advocate, but this kind of **** demonstrates a lack of QC and concern for the customer environment. These type of issues should definitely be exposed by a good QC system and if the firmware has the potential to wipe a config, for godness sakes it should not be released. Those of us who are long time Fortinet customers have learned to be wary of new releases and to always reboot the appliance, take a back up, and wait for others to expose the bugs, but it doesn't need to be that way with the right internal controls at Fortinet. Pick up the slack guys. You make a great product but you are tripping over your own feet when you release builds like this.
Completely agree!! And this is NOT the first time this happens........
Fortigate <3
Jones wrote:I had this problem, I upgraded to 5.2.4, was connected to the equipment by ssl vpn when the upgrade finished I no longer accessed the equipment with https, http, ssh or telnet FortiGate just received ping packets.
do you have two WAN internet connections?
FG200D 5.6.5 (HA) - primary [size="1"]FWF50B' s 4.3.x, FG60D's 5.2.x, FG60E's 5.4.x [Did my post help you? Please rate my post.][/size] FAZ-VM 5.6.5 | Fortimail 5.3.11 Network+, Security+
Paul S wrote:Jones wrote:I had this problem, I upgraded to 5.2.4, was connected to the equipment by ssl vpn when the upgrade finished I no longer accessed the equipment with https, http, ssh or telnet FortiGate just received ping packets.
do you have two WAN internet connections?
I have the same issue using three WAN internet connections, I'm waiting for a new firmware to solve all these problems.
If I increase the priority of one of those Interfaces, I can connect to SSL VPN or access the GUI.
When I change static routes, I start having problems with my other policy routes...so, I hope the new firmware will solve this.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1548 | |
1032 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.