- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
FortiOS Stability
Hello guys!
Im planning updating a few Fortigates from v7.2.6 build1575. I have two of them in HA. I would like to know what are you guys experience with 7.2.10M. Whats the stability and what issues if its the case that you guys are having?
- Labels:
-
FortiGate
-
High Availability
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello @aj-fernandez ,
You can refer this released nots and check all the known issues and resolved issues for firmware 7.2.10 : https://docs.fortinet.com/document/fortigate/7.2.10/fortios-release-notes/760203/introduction-and-su...
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello @aj-fernandez,
Pay special attention to the special notes in the release notes:
Special notices | FortiGate / FortiOS 7.2.10 | Fortinet Document Library
There is a change in Radius that can cause some headaches. See the following link for more info:
RADIUS vulnerability | FortiGate / FortiOS 7.2.10 | Fortinet Document Library
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
This is also NOT about stability but you need to be aware.
After 7.2.8, or newer, you would be forced to set schedule of auto-firmware upgrade when you log in via GUI. If you don't want to set an auto-upgrade schedule, get in via CLI and change the global setting below before logging in via GUI.
config system global
set gui-auto-upgrade-setup-warning disable
end
Toshi