https://docs.fortinet.com/product/fortigate/6.4
It's dropped support for the 30e / 50e, so I wont be able try and load into test lab :(
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi Philippe,
Most of the monitor pages have been moved to the dashboard and can be added as widgets. This change is mentioned in the release notes here: https://docs.fortinet.com/document/fortigate/6.4.0/fortios-release-notes/743723/new-features-or-enha...
550911: Consolidate Monitor and FortiView pages.
FortiView and Monitor entries have been removed from the navigation bar. Most of the pages under them now show up as widgets in several newly added default dashboards. Exceptions being:
- WiFi Client Monitor, which has been renamed to WiFi Clients and moved to the WiFi & Switch Controller section.
- Modem and WAN OPT pages which will still show up under Monitor if the feature is enabled.
Hi all,
I've had 6.4 running on a 60E for 18 days now. No issues with the upgrade and very stable. I quite like some of the GUI rearragnements and the upgrade has resolved a few issues I was seeing in 6.2.3 so I'm impressed so far.
As others have commented I think a short list of features and known issues gives me more condidence in the 6.4 release going forward. Hope others have similar experience.
However, I had noticed today that memory usage had climbed a bit. Memory use was around 67% initialy but had crept up to 80% today- so not serious, but would have triggered "Conserve Mode" in another day or two.
I had seen some comments (Reddit I think?) of someone else reporting similar issues which they believed were caused by the IOT daemon.
So quick diag check of the iotd:-
diag test app iotd 2 iotd_mem_stats: alloc 2484424 free 734627 fail 0 now 258984944 max 258984944
.........
and then a iod restart:-
diag test app iotd 99
gave me the following post-restart iotd memory stats:-
diag test app iotd 2 iotd_mem_stats: alloc 1611 free 1 fail 0 now 253268 max 253268
.........
This dropped the overall memory use from 80% back to 67% again.
So might be one to look for, and may indicate a slow memory leak in the iotd process?
I'll keep an eye on it and raise a ticket if I see it continue.
Kind Regards,
Andy.
Hello.
I have same problem with 6.4 on 60E and VLAN with PPPoE on WAN interface. IP not received from Internet Provider.
I´ve downgrade to 6.2.
Bye.
Tipdrill wrote:- Vlan do not work, everything is configured correctly. I have vlans with realy dhcp for avaya phones and the traffic no longer passes. The policies are correct.
Likely encountered a known issue mentioned in the release notes here: https://docs.fortinet.com/document/fortigate/6.4.0/fortios-release-notes/236526/known-issues
VLANs on a FortiLink interface configured to use a hardware switch interface may fail to come up after upgrading or rebooting.
Can you disable `monitor-bandwidth` for the interface from the CLI (instructions below), remove the widget for it from the GUI and add it again and let me know if that helps? If it does work, then it is likely an issue that we are looking to fix in a subsequent patch.- The new GUI does not load the interface bandwidth widgets. They remain in continuous loading.
To disable `monitor-bandwidth` for an interface:
> config system interface
> edit [insert port you want to edit]
> set monitor-bandwidth disable
> end
platenbaas wrote:Hope yet for my 50e test units - it would really help me if they are supported in 6.4Fortigate/FortiWifi 30E = not supported, but when i read the resolved issues i found the following
"574724 SSL VPN conserve mode on FWF-30E when FortiGate unit enters memory less than 25%."
very strange.
^^Actually would be very strange if 6.4 not supported as the units are net even end of sale yet, so at least 5 years support+ in them yet
Hi all, is it just me or is the monitoring section gone in 6.4 ??? I can not find how to display routes, devices, etc !!! HELP !
In fact, it has disappeared from the left hand bar, below Log & Report. Looking at all documentation, there are some screenshots that still show it, some where it has gone.
How the hell do we monitor things ???
Hi Philippe,
Most of the monitor pages have been moved to the dashboard and can be added as widgets. This change is mentioned in the release notes here: https://docs.fortinet.com/document/fortigate/6.4.0/fortios-release-notes/743723/new-features-or-enha...
550911: Consolidate Monitor and FortiView pages.
FortiView and Monitor entries have been removed from the navigation bar. Most of the pages under them now show up as widgets in several newly added default dashboards. Exceptions being:
- WiFi Client Monitor, which has been renamed to WiFi Clients and moved to the WiFi & Switch Controller section.
- Modem and WAN OPT pages which will still show up under Monitor if the feature is enabled.
OK ! It is a FEATURE. Everything has been moved to Dashboards. Big change, interesting approach, but quite disturbing !
One thing to watch out for is that if you upgrade your FortiManager to 6.4 you can't upgrade the ADOM to 6.4 yet. So if you're using FMG and FGT, dont upgrade your FGTs to 6.4 if you still want to manage them in FMG.
One nice thing I noticed is that they brought back WAN Opt in the GUI for FortiGate-VMs, wohoo!
Discovered a quite severe bug; I have a FG60E with a transparent VDOM through which I run IPTV. The STB gets it IP address from the BRAS through this VDOM. On 6.2.3 (and before) this is no problem. On 6.4.0 the STB doesn't get a response on the DHCP Discover. Tech support chat didn't know where I could report this. Anyone knows?
6.2.3:
vdom (TRANSP) # di sniffer packet any "port 67" 4 0 l
interfaces=[any]
filters=[port 67]
2020-04-07 21:59:06.929429 internal6 in 0.0.0.0.68 -> 255.255.255.255.67: udp 300
2020-04-07 21:59:06.929505 IPTV out 0.0.0.0.68 -> 255.255.255.255.67: udp 300
2020-04-07 21:59:06.929518 wan1 out 0.0.0.0.68 -> 255.255.255.255.67: udp 300
2020-04-07 21:59:06.943931 IPTV in 10.184.8.1.67 -> 10.184.11.253.68: udp 370
2020-04-07 21:59:06.943987 internal6 out 10.184.8.1.67 -> 10.184.11.253.68: udp 370
6.4.0
vdom (TRANSP) # di sniffer packet any "port 67" 4 0 l
interfaces=[any]
filters=[port 67]
2020-04-07 21:43:17.432823 internal6 in 0.0.0.0.68 -> 255.255.255.255.67: udp 300
2020-04-07 21:43:17.432882 IPTV out 0.0.0.0.68 -> 255.255.255.255.67: udp 300
2020-04-07 21:43:17.432891 wan1 out 0.0.0.0.68 -> 255.255.255.255.67: udp 300
2020-04-07 21:43:18.964584 internal6 in 0.0.0.0.68 -> 255.255.255.255.67: udp 300
2020-04-07 21:43:18.964654 IPTV out 0.0.0.0.68 -> 255.255.255.255.67: udp 300
2020-04-07 21:43:18.964665 wan1 out 0.0.0.0.68 -> 255.255.255.255.67: udp 300
2020-04-07 21:43:22.470057 internal6 in 0.0.0.0.68 -> 255.255.255.255.67: udp 300
2020-04-07 21:43:22.470129 IPTV out 0.0.0.0.68 -> 255.255.255.255.67: udp 300
2020-04-07 21:43:22.470139 wan1 out 0.0.0.0.68 -> 255.255.255.255.67: udp 300
-- Bjørn Tore
FYI: The beta was delayed and started on 1/30 this year according to FNDN.
Hello everyone I upgraded from 6.2.3 to 6.4 on my fortigate 61E and the wan Vlan links from the fiber provider are not connecting now to receive a public ip, reboot and factory reset to leave it clean of settings. still the same. It is not capable of receiving the public IP. through vlan, if I dowgrade to the old 6.2.3 if it works. Greetings
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1548 | |
1032 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.