.
FCNSA, FCNSP
---
FortiGate 200A/B, 224B, 110C, 100A/D, 80C/CM/Voice, 60B/C/CX/D, 50B, 40C, 30B
FortiAnalyzer 100B, 100C
FortiMail 100,100C
FortiManager VM
FortiAuthenticator VM
FortiToken
FortiAP 220B/221B, 11C
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
and still packet capture is hidden from the gui on the small boxes.
Not a big deal as it's still available by typing the url manually, but it's irritating.
techevo wrote:
Also on my 100D, Fortiview does not show anything in 5 min, 1 hours and 24 hours, only in now ( and yes I have log to disk enable ). It was working just fine in 5.2.1 - Any body else in the same boat or it's just me?
We had a similar issue in that FortiView did not show returns for 5 min, 1 Hour & 24 Hours. A Fortinet engineer recommended that we 'Enable Local reports' on Log Settings. We are now getting returns on all time frames.
Hope this helps.
ISOffice wrote:No worries, glad to hear it helped.
To be honest, I cannot see why this made the difference. Credit should really go to AJ in FortiNet Support.
JP
My guess is that FortiView uses the SQLlite database which is activated by "Local Report" feature.
FCNSA, FCNSP
---
FortiGate 200A/B, 224B, 110C, 100A/D, 80C/CM/Voice, 60B/C/CX/D, 50B, 40C, 30B
FortiAnalyzer 100B, 100C
FortiMail 100,100C
FortiManager VM
FortiAuthenticator VM
FortiToken
FortiAP 220B/221B, 11C
networkingkool wrote:Hi,Hi community,
I tried the image 5.2.2 for 80C unit few days ago. But something went wrong. The whole LANs behind the fortigate cannot go to Internet. Only fortigate unit itself can go to Internet.
I recheck my configuration many times but cannot find any error with the configuration. I have to revert back to the image 5.2.1 then LANs can go Internet without any changes in configuration.
I think the fortigate get problem with NAT function.
Does anyone have the same problem with me?
Please advice.
Goto: Policy & Objects -> Objects -> Services -> Open ALL and change Protocol number from 6 to 0
Fortigate <3
How can I get hold of a release note document
arshadm wrote:How can I get hold of a release note document
It's in the same folder as where you get the firmware. ( under download when you sign in with your user and password on fortinet support site ). Look for a pdf in the main folder of release 5.2.2
Hey,
So what about:
"Bug ID 0255603 Remove the default profile in deep-inspection-option /ssl-ssh-profile if it is not used. Otherwise, it will be renamed to deep-inspection-5-0. "
We use default ssl inspection profile in some fw policys (FGT 800c). What will be the impact of this? How do I nee to prepare for upgrade?
Petras wrote:Hey,
So what about:
"Bug ID 0255603 Remove the default profile in deep-inspection-option /ssl-ssh-profile if it is not used. Otherwise, it will be renamed to deep-inspection-5-0. "
We use default ssl inspection profile in some fw policys (FGT 800c). What will be the impact of this? How do I nee to prepare for upgrade?
From the bug notes above, it sounds like it only removes it if it's not in use. If you're using it, it just renames it to deep-inspection-5-0.
BWiebe wrote:Petras wrote:Hey,
So what about:
"Bug ID 0255603 Remove the default profile in deep-inspection-option /ssl-ssh-profile if it is not used. Otherwise, it will be renamed to deep-inspection-5-0. "
We use default ssl inspection profile in some fw policys (FGT 800c). What will be the impact of this? How do I nee to prepare for upgrade?
From the bug notes above, it sounds like it only removes it if it's not in use. If you're using it, it just renames it to deep-inspection-5-0.
Hi,
Not exactly ... that's what I was warning you about. It's not as described in the bug ID!
If you do use a profile called default it will be erased and it will be replaced with the new name deep-inspection-5-0 ( but with the default settings so you will loose all your customs settings ). So please rename your profile to whatever you feel like before doing the upgrade or you will end up with a bad surprise !
No worries, glad to hear it helped.
To be honest, I cannot see why this made the difference. Credit should really go to AJ in FortiNet Support.
JP
ISOffice wrote:No worries, glad to hear it helped.
To be honest, I cannot see why this made the difference. Credit should really go to AJ in FortiNet Support.
JP
My guess is that FortiView uses the SQLlite database which is activated by "Local Report" feature.
FCNSA, FCNSP
---
FortiGate 200A/B, 224B, 110C, 100A/D, 80C/CM/Voice, 60B/C/CX/D, 50B, 40C, 30B
FortiAnalyzer 100B, 100C
FortiMail 100,100C
FortiManager VM
FortiAuthenticator VM
FortiToken
FortiAP 220B/221B, 11C
What about memory usage on small model (40c, 60c, 60d) compared with 5.0.9?
Lucascat wrote:Hi, i check out some of my 60c`s, the memory is around 50 - 65% with no UTM, and normal small use. 100+ days uptime.What about memory usage on small model (40c, 60c, 60d) compared with 5.0.9?
Im also running a fwf60D with 5.2.2 "testmode" this is using 18%mem
Fortigate <3
In a policy, setting a service to 'ALL' wont pass any traffic for me. After defining each service manually it then succeeds.
Tried setting in GUI and CLI - same result.
60C Wifi - 5.2.2 - rule is applied to a software switch.. Haven't tried it on standard interface.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1688 | |
1087 | |
752 | |
446 | |
227 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.