Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
FGTuser
New Contributor III

FortiOS 5.0.6

5.0.6 is out share your experience please
64 REPLIES 64
isptools
New Contributor II

60D is running without known problems (also upgrade runs smoot).
Michael Killermann ISP-TOOLS GmbH Kohlenhofstrasse 60 -D 90443 Nuernberg - Germany Fortinet Certified Network & Security Professional #FCP1001
Michael Killermann ISP-TOOLS GmbH Kohlenhofstrasse 60 -D 90443 Nuernberg - Germany Fortinet Certified Network & Security Professional #FCP1001
Carl_Wallmark
Valued Contributor

I upgraded two 100D and a 60D, all went smooth and they are running without problems. If all is good this week, I will upgrade a 200B cluster from MR3 P15 next weekend.

FCNSA, FCNSP
---
FortiGate 200A/B, 224B, 110C, 100A/D, 80C/CM/Voice, 60B/C/CX/D, 50B, 40C, 30B
FortiAnalyzer 100B, 100C
FortiMail 100,100C
FortiManager VM
FortiAuthenticator VM
FortiToken
FortiAP 220B/221B, 11C

FCNSA, FCNSP---FortiGate 200A/B, 224B, 110C, 100A/D, 80C/CM/Voice, 60B/C/CX/D, 50B, 40C, 30BFortiAnalyzer 100B, 100CFortiMail 100,100CFortiManager VMFortiAuthenticator VMFortiTokenFortiAP 220B/221B, 11C
mhe
Contributor II

Upgraded a FG-60c with many IPSEC VPN' s - no problems so far. RAM utilization seems a bit lower than with 5.0.5. martin
HA
Contributor

Hello, Upgraded a cluster of 240D and an FGT90D. Running fine for the moment... Regards, HA
natech
New Contributor

Upgraded my 1000C with no problems. Had many policies utilizing zones, along with several IPSEC VPNs. Nothing seems to be broken and RAM utilization does seem a bit lower. Per the release notes, I ran " execute report-config reset" and " execute report recreate-db" after the update, prior to running any reports.
isptools
New Contributor II

on my 60D the RAM-Usage is lower than with 5.05. The other Systems (100D, 300C and 200B) are in the queue.
Michael Killermann ISP-TOOLS GmbH Kohlenhofstrasse 60 -D 90443 Nuernberg - Germany Fortinet Certified Network & Security Professional #FCP1001
Michael Killermann ISP-TOOLS GmbH Kohlenhofstrasse 60 -D 90443 Nuernberg - Germany Fortinet Certified Network & Security Professional #FCP1001
ddskier
Contributor

ARGH. Once again they forgot to post the MSI file for the SSLVPN client that goes with this new firmware.

-DDSkier FCNSA, FCNSP FortiGate 400D, (2) 200D, (12) 100D, (2) 60D

-DDSkier FCNSA, FCNSP FortiGate 400D, (2) 200D, (12) 100D, (2) 60D
rwpatterson
Valued Contributor III

ORIGINAL: ddskier ARGH. Once again they forgot to post the MSI file for the SSLVPN client that goes with this new firmware.
Wow. That' s getting quite old...

Bob - self proclaimed posting junkie!
See my Fortigate related scripts at: http://fortigate.camerabob.com

Bob - self proclaimed posting junkie!See my Fortigate related scripts at: http://fortigate.camerabob.com
veechee

ORIGINAL: ddskier ARGH. Once again they forgot to post the MSI file for the SSLVPN client that goes with this new firmware.
GRRR!!! Why does Fortinet have something against .MSI all of a sudden? I am getting tired of opening a support ticket every time!
Top Kudoed Authors