Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
micahawitt
New Contributor III

FortiOS 5.0.4

Any ideas as to when this gets released? Any ideas as to fixes they are proposing?
57 REPLIES 57
DirtyBlueshirt

...aaaaany time now
--- Aaron Slater Security Analyst, Network Engineer, Part-Time Everything Else
jmac

And it' s out!
emnoc
Esteemed Contributor III

And it' s download and installed :) Still reading the release note and the bug fixes.

PCNSE 

NSE 

StrongSwan  

TechnoRave850

WoooHooo Bout darn time!! Downloading now to my test box, please hope alot is fixed ,and getting more and more polished.
Toni_Sulosalmi
New Contributor

Tested 5.0.4 with FGT 40C and noticed that my download speed is very low. Even when you take away all the scanning options my 100Mbit connection download speed was 1 mbit. Has somebody noticed similar behavior?
Deftone

No no problems with speed at this end.
rwpatterson

Check to see if possibly the port duplex has changed on the WAN interface.

Bob - self proclaimed posting junkie!
See my Fortigate related scripts at: http://fortigate.camerabob.com

DirtyBlueshirt

ORIGINAL: Toni Sulosalmi Tested 5.0.4 with FGT 40C and noticed that my download speed is very low. Even when you take away all the scanning options my 100Mbit connection download speed was 1 mbit. Has somebody noticed similar behavior?
How is your memory usage in 5.0.4 versus 5.0.3? I had to keep 4.3.14 on mine due to the out-of-control memory usage when using a basic feature set.
--- Aaron Slater Security Analyst, Network Engineer, Part-Time Everything Else
mb0101

ORIGINAL: Toni Sulosalmi Tested 5.0.4 with FGT 40C and noticed that my download speed is very low. Even when you take away all the scanning options my 100Mbit connection download speed was 1 mbit. Has somebody noticed similar behavior?
I am having the exact same problem on my 40C. There is something significantly wrong on this update. Check your traffic lights on your switch. When I go to 5.0.4, this thing is BLASTING packets like crazy out of the port (constant light fast blinking). However, it' s fine on 5.0.3. I have factory reset and reformatted more times than I can count with the same results. Anybody else having this?
bobm
New Contributor III

Mine improved significantly. Running a 60C with dual load-balanced WAN. About 30 users with Web Filter, IPS, and AV. 5.0.2 and 5.0.3 spiked memory into the high 70s dipping into the 80s and Conserve mode, even after disabling IPS and AV. Now in the high 60s with AV/IPS enabled again. Still not where I' d like it, but no more danger of Conserve Mode. Also very happy to get my traffic monitors per interface back onto the GUI. Now if they' d only fix the HTTPS bypassing the web filters......
Top Kudoed Authors