FortiOS 5.0.2 HA config edit bug (100D)

[Rob_Jefferis]

Hi all. I have been testing an active passive HA setup with 2 100Ds running 5.0.2. Almost immediately I have noticed what looks to be a bug. Having configured basic settings on both units I then set them both into active passive mode with required details. The cluster negotiates and both units are then visible in the system/config/ha window. When i click on the " edit" button for the active member, the HA config screen comes up, if however I click on the edit button for the passive member I get a cannot display the web page error and the console of the primary (and possibly secondary) unit logs the errors i have attached below. Anyone got any ideas? Thanks Rob

[stephen_ren_FTNT]

When i click on the " edit" button for the active member, the HA config screen comes up, if however I click on the edit button for the passive member I get a cannot display the web page error and the console of the primary (and possibly secondary) unit logs the errors i have attached below.

It seems like a bug.We are investigating on it and will fix it later.If there is any progress I' ll let you know.Thanks.

[Robert_Jefferis]

Thanks Also, another minor one, not sure if it is related. When viewing the HA Statistics page the name of the passive unit is always incorrect, rather than the name i have set it is currently showing " er-csum FG100D.........." Thanks Rob

[Roberto_Reiner_Uhry]

I' m having the the exact same issue with a pair of 100D units, and with 60C the error starts when you try to access HA Statistcs. Few more things that I saw. 100D: if I try to get stats on the CLI, It' s enter on loop, when showing the slave unit, and repeat until I close the connection. 60C: if I try to get stats, It just disconnect my cli. on my 200B it' s perfect. On all HA is working, only with status and edit issue. Best Regards, Reiner