Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
vanc
New Contributor

FortiOS 4.3.7 is out

Release notes. http://sdrv.ms/JSJXv6 Update: Latest version. Switched to skydrive for sharing.
41 REPLIES 41
TopJimmy
New Contributor

Upgraded a test FWF-60c this morning and so far, so good. memory and CPU utilization are pretty low and webui interface is very snappy. Wireless is good (so far). My only issue is that I didn' t see in the release notes that bug 145644 (SSLVPN Native RDP bug) was fixed. I' ll ask the vendor to see if it was but wasn' t included in the release notes (This section lists the known issues of this release, but is not a complete list. For inquires about a particular bug, please contact Customer Support.)
-TJ
-TJ
vanc
New Contributor

The resolved issues in the notes are really incomplete. I know a couple of AV related fixes not mentioned at all.
Carl_Wallmark
Valued Contributor

I too have a bug that should be fixed in this release, regarding a buffer with 3G-modems. But I must say they have done a pretty good job, one customer of mine have two 80C in a Active-Passive cluster, memory with 4.3.6 was around 75-80 %, now its down to 40 %

FCNSA, FCNSP
---
FortiGate 200A/B, 224B, 110C, 100A/D, 80C/CM/Voice, 60B/C/CX/D, 50B, 40C, 30B
FortiAnalyzer 100B, 100C
FortiMail 100,100C
FortiManager VM
FortiAuthenticator VM
FortiToken
FortiAP 220B/221B, 11C

FCNSA, FCNSP---FortiGate 200A/B, 224B, 110C, 100A/D, 80C/CM/Voice, 60B/C/CX/D, 50B, 40C, 30BFortiAnalyzer 100B, 100CFortiMail 100,100CFortiManager VMFortiAuthenticator VMFortiTokenFortiAP 220B/221B, 11C
Robert_Cerny
New Contributor II

Hi, I installed this fresh build on my FG80C and it works great. However it looks like I lost WebCache and WAN optimization settings in GUI. Does anyone know how to re-enable it? Thanks
FG-100C FG-100A FW-50B FG-60C
FG-100C FG-100A FW-50B FG-60C
veechee
New Contributor

I just upgraded and it looks good. Memory usage is at 48% after 3 hours of uptime.
Carl_Wallmark
Valued Contributor

I installed this fresh build on my FG80C and it works great. However it looks like I lost WebCache and WAN optimization settings in GUI. Does anyone know how to re-enable it?
On the smaller boxes, the WanOpt is CLI only.

FCNSA, FCNSP
---
FortiGate 200A/B, 224B, 110C, 100A/D, 80C/CM/Voice, 60B/C/CX/D, 50B, 40C, 30B
FortiAnalyzer 100B, 100C
FortiMail 100,100C
FortiManager VM
FortiAuthenticator VM
FortiToken
FortiAP 220B/221B, 11C

FCNSA, FCNSP---FortiGate 200A/B, 224B, 110C, 100A/D, 80C/CM/Voice, 60B/C/CX/D, 50B, 40C, 30BFortiAnalyzer 100B, 100CFortiMail 100,100CFortiManager VMFortiAuthenticator VMFortiTokenFortiAP 220B/221B, 11C
ejhardin
Contributor

All, Does anyone know how to set the Fortigate 200B with hard to send real time logs to FAMS as stated in the release notes? " FortiGate models with a hard disk can send real time logs to the FAMS service" This feature was removed a long time ago and I' m glad to see it back but can' t find the setting for it.
ede_pfau
Esteemed Contributor III

Default setting is daily transfer. You can change that in the CLI:
  config log fortianalyzer setting 
     set upload-option realtime 
  end

Ede

"Kernel panic: Aiee, killing interrupt handler!"
Ede"Kernel panic: Aiee, killing interrupt handler!"
ejhardin
Contributor

FAMS service
Ede, That works if you own a Fortianalzer but I' m using the Fortinet cloud service " FAMS service" . Any ideas?
Top Kudoed Authors