FortiOS 4.00 MR2 is out !

[Carl_Wallmark]

.

[romanr]

MR2 seems to have problems with the ipsengine, like early 4.0 and some of 3 MR5 and MR6 builds had.... ipsengine uses all cpu but you can restart it easily! regards, Roman

[snowman386]

how do you restart it so easily? since our upgrade to MR2, cpu has been a steady 95-99%!

[romanr]

ORIGINAL: snowman386 how do you restart it so easily? since our upgrade to MR2, cpu has been a steady 95-99%!

Find the process id via: diag sys top and kill the ipsengine daemon (if it is it, that eats up all the cpu) with: diag sys kill 8 <PID> regards, Roman

[g3rman]

You can also try: diag test app ipsmonitor 99 which restart the IPS engine. Take a look at this blog post: http://firewallguru.blogspot.com/2008/06/problems-with-ips-engine.html

[BBoysza]

IPS Engine bug 122860. I was suppled with a patch: nids-400-1162-122860_V4.2.pkg after crushing a 110C. Rolled back so I have not verifed the fix.

[Carl_Wallmark]

Do you need to get the patch from support or will it be distributed via FortiGuard as normal ?

[Yngve0]

Installed on a test box so far; The biggest benefit I found with this new GUI is that it is easier to switch between different VDOM. I, as other mentioned, also miss the delete/edit option on each entry. Multiselect is nice for multideleting, but makes it harder to find entries that is not in use. Under IPSEC/AutoKey there are no actions, neither for Add, delete og edit. How to create ipsec-tunnels? Y

[Carl_Wallmark]

Under IPSEC/Autokey you have 4 buttons: " EDIT " DELETE" " Create Phase1" " Create Phase2"

[Yngve0]

Hm?? Thanks,Found it in Google chrome, but IE7 reports error on page. . . .

[Carl_Wallmark]

im using IE8, some users have reported that they had to empty there webbrowser cache, try that !