FortiNac and Enterasys B5 Switch configuration

[hiclsr]

Hello everyone;
There is an Enterasys B5G 48P switch in our institution. We ordered FortiNAC. Has anyone configured it with B5 before without any problems? I couldn't find a detailed solution in the documentation.

[Sx11]

SNMP and CLI are mandatory in order to establish visibility.

1. Use SNMPv2c for ease of configuration
2. For CLI Use SSH version 2
3. Use MAC notification traps.

You can check below external article for configuring MAC trap example in Enterasys:

https://www.packetfence.org/doc/PacketFence_Network_Devices_Configuration_Guide.html#_enterasys

For proper implementation go through this article starting from the "Establish Visibility" section: 

https://community.fortinet.com/t5/FortiNAC/Technical-Tip-Comprehensive-guide-for-a-simple-FortiNAC/t...