- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
FortiNAC - two guest portals
Hi Guys,
We have two sites connected together but we want to have two guest portals so that we can get a user from each site to approve the requests.
Currently it is setup as one guest portal.
Any guides or help to achieve this?
We are on FortiNAC 7.6.2.0715 (GA)
Thanks
John
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello @jbrines
As mentioned by @AEK the same portal policy is also available in FNAC-F.
https://docs.fortinet.com/document/fortinac-f/7.6.0/administration-guide/567487/portal-policy
You can segregate the traffic based on users/host profile and then match the portal. There could be multiple policies, but the first one that matches will be applied.
regards,
Sheikh
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I never used it before but I remember the portal policy feature was in FortiNAC version 9.x, but I don't know if it still exist on FortiNAC-F 7.x.
https://docs.fortinet.com/document/fortinac/9.4.0/administration-guide/567487/portal-policy
Hope it helps.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello @jbrines
As mentioned by @AEK the same portal policy is also available in FNAC-F.
https://docs.fortinet.com/document/fortinac-f/7.6.0/administration-guide/567487/portal-policy
You can segregate the traffic based on users/host profile and then match the portal. There could be multiple policies, but the first one that matches will be applied.
regards,
Sheikh
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
What is the difference between FortiNAC 9 and 7?
Should I move to 9?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
No you should not move.
- FortiNAC (9.x) is the old Fortinet NAC solution (should be end of life soon)
- FortiNAC-F (7.x) is the new Fortinet NAC solution
Created on ‎03-17-2025 07:56 AM Edited on ‎03-17-2025 07:58 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello @jbrines
These are just two different firmwares of FortiNAC.
Fortinac 9.X uses CentOS
Fortinac 7.X is available with CentOS or FortiNACOS. Development will be limited to FortiNAC OS in the future.
The FortiNAC operating system does not support direct shell access. CLI access is somehow similar to FortiOs.
regards,
Sheikh
