Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Thinhnx
New Contributor

FortiManager license trial cannot add FortigateVM trial, and error "Probe Failed"

Dear TAC,

I registered the FortiManager Trial for lab demo, and I have FortiGate VM trial, so I can't add Fortigate VM into FortiManager. Please help me and give me a solution for this issue.

I tried follow this guide, but still not working:

https://community.fortinet.com/t5/FortiGate/Technical-Tip-Getting-error-Probe-Failed-message-while-a...

 

Thank you.

1 Solution
Thinhnx

Hi all,

This issue has been resolved, I tried follow this way, on FortiManager:

- config sys global

- set enc-algorthm low

- set fgfm-ssl-protocol tlsv1.0

 

After I set this command, I can add fortiGate into FortiManager and vice versa


Thank you, have a nice day.

View solution in original post

4 REPLIES 4
Anthony_E
Community Manager
Community Manager

Hello Thinhnx,

 

Thank you for using the Community Forum.

I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.

 

Regards,

Anthony-Fortinet Community Team.
Anthony_E
Community Manager
Community Manager

Hello,

 

I have found an old forum post which is explaining how to fix this issue:

 

https://community.fortinet.com/t5/Fortinet-Forum/Probe-Failing-when-adding-device/m-p/6090?m=154510

 

Regards,

Anthony-Fortinet Community Team.
Debbie_FTNT
Staff
Staff

Hey Thinhnx,

it sounds as if all you tried so far was to add the FortiGate from FortiManager.

If you haven't already, you can try the other way around, point FortiGate to FortiManager. On FortiManager you should usually see an unauthorized device crop up in root ADOM, which you can then authorize and add to an ADOM.
To do this, simply configure central management on FortiGate; how this can be done varies by firmware, but via is CLI is fairly straightforward:
https://docs.fortinet.com/document/fortigate/6.0.0/cli-reference/680692/system-central-management
- set the mode (normal)
- set type (fortimanager)
- set fmg (FortiManager IP or hostname)
- set serial (FortiManager S/N)
- set enc-algorithm (default or high)

+++ Divide by Cucumber Error. Please Reinstall Universe and Reboot +++
Thinhnx

Hi all,

This issue has been resolved, I tried follow this way, on FortiManager:

- config sys global

- set enc-algorthm low

- set fgfm-ssl-protocol tlsv1.0

 

After I set this command, I can add fortiGate into FortiManager and vice versa


Thank you, have a nice day.

Labels
Top Kudoed Authors