FortiManager Import Configuration Address Object interface binding contradiction

[kyle-hsuan]

I have the same question as KB below

Technical Note: Policy Package gets imported incompletely into FortiManager

Is there any other solution in the new version?

Is it possible to make quick adjustments from FortiManager during import configuration to make it import properly?

Thanks.

[Anthony_E]

Hello Kyle,

Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.

Thanks,

[Anthony_E]

HEllo,

Here the answer form one of our expert:

"There is an interface mapping dialog where you can choose the actual mapping at the import time, this should avoid conflicts at the first place:

https://docs.fortinet.com/document/fortimanager/7.4.2/administration-guide/337348/importing-policies...

[kyle-hsuan · Accepted solution]

Hi @Anthony_E 

I had a problem about firewall address conflicts.

"firewall address",FAIL,"(name=10.0.0.0/8, oid=2271, reason=interface((firewall address:10.0.0.0/8) wan1<-any) binding fail)"

So I used version 7.4.2, it will auto map to dynamic type address object, that
Solved my problem.

Thanks.

[Anthony_E]

Hello Kyle,

Thanks a lot for sharing your solution!

Regards,