FortiManager 5.4.1

[Carl_Wallmark]

I am taking the FortiManager 5.4.1 for a test spin, and have found that the FortiView "module" is not working.

I have logs in the "Log View" but nothing is showing up at the FortiView.

FortiManager 5.4.1 Hyper-V

FortiGate 100D with 5.4.1

Firewall is added to the Manager, everything seems ok, I can see the logs and push out config etc... but nothing in the FortiView.

I am also testing the new EMS 1.0.1, and have pushed out FortiClient 5.4.1 to a few computers, and the logs are received at the Manager, but nothing in the FortiView in the FortiClient ADOM.

I upgraded from FortiManager 5.4.0.

Known issue or is there something I should do ?

[Carl_Wallmark]

Update:

I did a fresh install with 5.4.1 and now FortiView is working again.

So there must be some issues with the upgrade from 5.4.0.

[scao_FTNT]

thanks for the issue details, we have confirmed this upgrade issue on FMG side (FAZ is OK)

and after FMG upgrade, pls use below workaround to remove old hcache table

FMG-VM64 # dia sql remove hcache all The hcache tables for all ADOMs will be erased! Do you want to continue? (y/n)y Done.

we will fix this upgrade issue for next release

Thanks

Simon

[Carl_Wallmark]

Thanks Simon!