Hi,
We just applied the 5.2.6 FortiManager upgrade. We're coming from 5.2.4. After the upgrade, the login page shows the usual "The system is unavailable due to configuration update. Device logs are not accepted at this time." and the progress bar is stuck at 75% for the past 10 minutes or so. Is this expected? I haven't had an update take this long before.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
what is the console output?
Thanks
Simon
scao_FTNT wrote:what is the console output?
Thanks
Simon
I don't have access to that at the moment, the device is in our UK datacenter.
in 5.2.6, there has some code added for upgrade check and fix for the db issue if any during upgrade, but the detailed info only printed on console during upgrade
if you still see the issue and GUI stopped there, you may need to open a ticket and provide your 5.2.4 db, send me the ticket ID and I will follow up your ticket
Thanks
Simon
scao_FTNT wrote:in 5.2.6, there has some code added for upgrade check and fix for the db issue if any during upgrade, but the detailed info only printed on console during upgrade
if you still see the issue and GUI stopped there, you may need to open a ticket and provide your 5.2.4 db, send me the ticket ID and I will follow up your ticket
Thanks
Simon
That code must be REALLY slow to run or we had a LOT of errors to fix. After 10 hours, the progress bar is now sitting at 100%, though not complete enough to log in. We will let it sit overnight and update if it clears. Might be worth noting this type of event could happen, if it was in the upgrade guide, I don't recall it being called out very noticeably.
The FortiManager completed the tasks finally and is back up and running normally. Definitely need to warn people it could take over 16 hours to do an upgrade.
Ok, now a new problem (could be what caused the upgrade issues?) Somehow now we have an object in "Rating Overrides" called "Access Granted" with a category of "Allow". Every device uses the Allow category, and now I can't delete this object, or the allow category. Any clue? It's now failing every device policy install because the URL has invalid syntax (of course).
what is the FGT version? can you show me the failed install log?
thanks
Simon
scao_FTNT wrote:what is the FGT version? can you show me the failed install log?
thanks
Simon
FortiGate versions range from 5.0.9 to 5.0.13. I've found a workaround by setting up a new ADOM and am re-importing everything. Not like IT people have weekends or anything
I'll get the log here in a moment...
Here's the syntax around that particular error:
GB1EXTSMAFGT1000_001 (VPN-VDOM) $ config webfilter ftgd-local-rating
GB1EXTSMAFGT1000_001 (ftgd-local-rating) $ edit "Access Granted"
node_check_object fail! for url Access Granted
value parse error before 'Access Granted'
Command fail. Return code -257
GB1EXTSMAFGT1000_001 (ftgd-local-rating) $ set rating "142"
GB1EXTSMAFGT1000_001 (ftgd-local-rating) $ next
GB1EXTSMAFGT1000_001 (ftgd-local-rating) $ end
GB1EXTSMAFGT1000_001 (VPN-VDOM) $ end
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1641 | |
1069 | |
751 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.