FortiManager 5.2.6 upgrade - Post Upgrade Config Update stuck at 76%
We just applied the 5.2.6 FortiManager upgrade. We're coming from 5.2.4. After the upgrade, the login page shows the usual "The system is unavailable due to configuration update. Device logs are not accepted at this time." and the progress bar is stuck at 75% for the past 10 minutes or so. Is this expected? I haven't had an update take this long before.
in 5.2.6, there has some code added for upgrade check and fix for the db issue if any during upgrade, but the detailed info only printed on console during upgrade
if you still see the issue and GUI stopped there, you may need to open a ticket and provide your 5.2.4 db, send me the ticket ID and I will follow up your ticket
That code must be REALLY slow to run or we had a LOT of errors to fix. After 10 hours, the progress bar is now sitting at 100%, though not complete enough to log in. We will let it sit overnight and update if it clears. Might be worth noting this type of event could happen, if it was in the upgrade guide, I don't recall it being called out very noticeably.
Ok, now a new problem (could be what caused the upgrade issues?) Somehow now we have an object in "Rating Overrides" called "Access Granted" with a category of "Allow". Every device uses the Allow category, and now I can't delete this object, or the allow category. Any clue? It's now failing every device policy install because the URL has invalid syntax (of course).
value parse error before 'Access Granted' Command fail. Return code -257 GB1EXTSMAFGT1000_001 (ftgd-local-rating) $ set rating "142" GB1EXTSMAFGT1000_001 (ftgd-local-rating) $ next GB1EXTSMAFGT1000_001 (ftgd-local-rating) $ end GB1EXTSMAFGT1000_001 (VPN-VDOM) $ end
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.