FortiLink Over SFP

[HaithamS]

Hi

Im new to FotiSwtch and we have a plan to replace our Cisco 3560 with FortiSwitch the current environment consists of 4 locations where the 108E will be installed which needs to serve 3 VALNS and needs some help to know if FortiLink will going to work over SFP as per attached diagram? And if there will be any type of limitations in this setup.

Thanks in advance.

[Anthony_E]

Hello HaithamS,

Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.

Thanks,

[Anthony_E]

Hello HaithamS,

I found this complete documentation where you could find a solution:

https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/d60ec86c-919f-11eb-b70b-005056...

Could you please have a look and tell me if it helped you?

Regards,

[HaithamS]

Thanks Anthony

[sachitdas_FTNT]

Hi,

Yes, this will work, we recommend using compatible SFPs. Please refer https://docs.fortinet.com/document/fortiswitch/hardware/compatible-transceivers?model=all

and https://docs.fortinet.com/document/fortiswitch/7.0.4/fortilink-compatibility

[HaithamS]

Thanks Sachit