Hi
Im new to FotiSwtch and we have a plan to replace our Cisco 3560 with FortiSwitch the current environment consists of 4 locations where the 108E will be installed which needs to serve 3 VALNS and needs some help to know if FortiLink will going to work over SFP as per attached diagram? And if there will be any type of limitations in this setup.
Thanks in advance.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello HaithamS,
Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.
Thanks,
Hello HaithamS,
I found this complete documentation where you could find a solution:
Could you please have a look and tell me if it helped you?
Regards,
Thanks Anthony
Hi,
Yes, this will work, we recommend using compatible SFPs. Please refer https://docs.fortinet.com/document/fortiswitch/hardware/compatible-transceivers?model=all
and https://docs.fortinet.com/document/fortiswitch/7.0.4/fortilink-compatibility
Thanks Sachit
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1702 | |
1092 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.