Hi all,
I want use web filtering by using Fortiguard.
So, i created a Web filter profile and enabled fortiguard categories and apply it to a given ACL.
The issue is when i test this, all sites are authorized, even if i blocked all the categories on Fortiguard.
What can be the cause of this?
Fortigate 100D.
FortiOS: 5.2.2 Build642
Thanks for help!!
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi
I will advise to see the license information in dashborad (license information). Web category will block only http based connection. For blocking https connection please follow link to achieve.
Regards
Bikash
Hi Zahraoui.
Fire wall policy rules are executed from top-down in the firewall chain. From the screenshot, it looks like you have created an identity (GRP-SECOP) firewall policy -- is this policy near or at the top of the firewall rules list? A screenshot of the firewall rules list would be nice.
Also can you provide more info on WHP-GRP-WEB-SERVICES? If this custom service is meant to cover HTTP/HTTPS traffic, it should have the source ports set to 1-65535.
NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
Hi Dave,
No issue about the rule order (this is a test rule), this rule is in the top before other rules more general. And my test user is member of this group / GRP-SECOP
About Service group, it's contain web ports (http, https and also tcp/8000, tcp/8080), but i think that the rule controls just the destination ports and no filtering aplied to the source ports.
I note that i use the same group of service with other rules by appling web filter profiles using url filtering and this work perfectly. The issue is just with fortiguard categories.
Try sniffing that test user traffic, eg.
diag debug reset diag debug flow filter addr <test user IP address> diag debug flow filter proto 6 diag debug flow filter port 80 diag debug flow show console enable diag debug flow trace start 1000 diag debug en
NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
hi,
try go to config>fortiguard to check which port are reachable to fortiguard server.
There is a "Test Availability" button under "Web Filtering and Email Filtering Options".
Fortigate to access fortiguard to get the category of web filtering using port 53 or 8888.
Besides, you can use following command to check the fortiguard connectivity as well:
FG60DP4614001443 # diag debug rating Locale : english License : Contract Expiration : Sat Jan 2 2016
-=- Server List (Mon Mar 2 09:18:20 2015) -=-
IP Weight RTT Flags TZ Packets Curr Lost Total Lost 121.111.236.180 10 110 9 4480 0 11 121.111.236.179 10 110 9 6509 0 13 62.209.40.74 70 422 1 3701 0 256 62.209.40.73 70 425 1 3674 0 226 62.209.40.72 70 434 1 3714 0 269 80.85.69.40 80 395 0 3669 0 221 80.85.69.37 80 405 0 3696 0 251 80.85.69.41 80 415 0 3680 0 232 80.85.69.38 80 417 0 3711 0 263 66.117.56.42 130 243 -5 3450 0 0 209.222.147.36 130 249 -5 3453 0 3 66.117.56.37 130 252 -5 3456 0 6 209.222.147.43 130 265 -5 3457 0 7 64.26.151.37 130 344 -5 3607 0 157 64.26.151.36 130 344 -5 3608 0 159 64.26.151.35 130 345 -5 3604 0 155 69.195.205.101 130 405 -5 3698 0 253 69.195.205.102 130 413 -5 3708 0 263 96.45.33.64 160 176 -8 3451 0 1 96.45.33.65 160 195 -8 3453 0 3 208.91.112.196 160 213 D -8 3498 0 45 208.91.112.200 160 218 -8 3483 0 37 208.91.112.198 163 2204 DI -8 3596 0 140
FG60DP4614001443 #
Regards,
Soon Guan
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1688 | |
1087 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.