Hi
FortiManager use v7.4.3
please refer to the picture.
the process stuck in 36%
it seens like FMG not push the firmware to FGT.
if I wating one hours, the Progress Report show "upgrade image timeout"
I checked my other firewall, tcp 541 is allowed, but I don't see the FMG push firmware to FGT's log.
Thanks.
Hi @kyle-hsuan ,
Can you try to re-type the password of the FGT in device manager by right click on the device and choose edit:
At the same time, please disable the disk check from FMG cli:
config fmupdate fwm-setting
set auto-scan-fgt-disk disable
set check-fgt-disk disable
end
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1063 | |
889 | |
527 | |
441 | |
152 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.