FortiGate automation - Send email or telegram or WhatsApp notifications.

[Marcos_FDS1012]

Hello,

I'm trying to create a notification when my internet link is down to send a message by e-mail, but I'm getting 3 e-mails with DOWN and UP status, would you have a tutorial I can see where I'm going wrong?

Another thing, would it be possible to send this by telegram or WhatsApp? I can't do it through teams because Microsoft is giving me an error in the apps.

I'll send a printout of my settings

[AEK · Accepted solution]

Hi Marcos

I don't think you can send Telegram or WhatsApp message from FG, but I guess you can do it from your monitoring server, as it receives the related syslog message or snmp trap from FG.

[AEK · Accepted solution]

You may use the "status" field in the trigger to check if it matches the right value (I don't know what is the value to match).

https://docs.fortinet.com/document/fortiproxy/7.4.4/log-message-reference/20090/20090-log-id-intf-li...

Didn't test it but I think it should work.

[AEK · Accepted solution]

Then you may keep 20099. It also has "status" field.

https://docs.fortinet.com/document/fortigate/7.4.4/fortios-log-message-reference/20099/20099-log-id-...

As per my research, in your case the "status" field must match the string "DOWN" (in capital letters).

[Marcos_FDS1012 · Accepted solution]

Of course, as I said, I receive 3 e-mails, two down and one up.

[AEK · Accepted solution]

Hi Marcos

I don't think you can send Telegram or WhatsApp message from FG, but I guess you can do it from your monitoring server, as it receives the related syslog message or snmp trap from FG.

[Marcos_FDS1012]

I made this configuration to receive by E-mail, when I go to the Interface and disable it, I receive 3 E-mails two DOWN and UP I wanted to receive only one DOWN and nothing else.

[AEK · Accepted solution]

You may use the "status" field in the trigger to check if it matches the right value (I don't know what is the value to match).

https://docs.fortinet.com/document/fortiproxy/7.4.4/log-message-reference/20090/20090-log-id-intf-li...

Didn't test it but I think it should work.

[Marcos_FDS1012]

Hello I was using Event 20099 when I changed to 20090 I no longer receive E-mail .

I don't know what I'm doing, I'm going to the interface and disable it.

[AEK · Accepted solution]

Then you may keep 20099. It also has "status" field.

https://docs.fortinet.com/document/fortigate/7.4.4/fortios-log-message-reference/20099/20099-log-id-...

As per my research, in your case the "status" field must match the string "DOWN" (in capital letters).

[Marcos_FDS1012]

I'm receiving e-mail, but when I leave the link down I get two downs and one up, when I return to the link I get an up e-mail just fine, but when it stays down I get 3 e-mails

[AEK]

Can you share the content of both mails?

[Marcos_FDS1012 · Accepted solution]

Of course, as I said, I receive 3 e-mails, two down and one up.

[AEK]

Can you try configure the stitch like shown below a,d try again?